Knowledge

Triethanolamine (TEA) neutralizes acids and inhibits corrosion in metalworking fluids. How effective is its corrosion inhibition after acid neutralization, and why is it frequently used in anti-rust f

Screw air compressors tripping on high temperature from coking? Diester base oils cut through varnish and hold carbon deposits in check — thanks to their polar molecular structure and strong oxidative

Synthetic esters handle heat and moisture far better. Mineral oil, on the other hand, is cheap and insulates just fine. What you need really depends on the environment — a plain rural or suburban dist

Engine wear is a major source of losses; simply increasing lubricant viscosity cannot resolve this issue. Friction modifier (FM) is used to reduce friction and improve fuel economy.

PAG worm gear oil prolongs the oil’s service life. Why is it useful? How does PAG worm gear oil work?

Metal deactivators are essential components in high-performance oils. They serve two primary functions: first, controlling the corrosive effects of active sulfur; second, controlling the catalytic eff

As is well known, common compressor oils on the market include mineral oils, PAO (polyalphaolefins), Polyalkylene Glycol(PAG), and synthetic esters. Among them, compressor oils formulated with PAG as

PAG Synthetic Compressor Oil is a fully synthetic air compressor lubricant formulated with a blend of polyalkylene glycol (PAG) and synthetic ester as base oils. It is widely used in severe operating

Learn when to change automatic transmission fluid (ATF). Understand viscosity-temperature performance, key additives, and avoi
d common mistakes to extend transmission life.

Owing to their non-flammability, good lubricity, and low cost, HFC Water-Glycol Fluids are the metallurgical mainstream.

The pros of polyol ester-thermal stability and a wide temperature range making it have the preferred choice for lubricants. Polyol esters can enhance equipment lubricity, rubber seal swell characteris

Naphthenic transformer oil has appropriate solubility, excellent low-temperature and electrical performance, and anti-gassing properties, giving it an advantage over transformer oils.